Product introduction

7107-1 frosted one end both sides microscope slide with unground edges is usually 25.4mm×76.2mm, with a thickness between 1.0 - 1.2mm. This size is the standard specification for microscope slides and fits the stage of most microscopes, makes it easy to operate and observe. Judging from the edge treatment, it is a rough edge design. At one end of the slide, both front and back sides have been frosted. The frosted area accounts for about 1/3 of one end of the slide and can be used for writing or marking, makes it easier for the experimenter to record sample information, experimental conditions, etc. It is cut from 1mm thick original glass. The original cut on the edge of the glass is kept at a 90-degree right angle, and then the front and back sides of one end are chemically frosted. Compared with some glass slides that have gone through multiple complex grinding processes, it requires fewer processing steps, has a higher quality glass working surface, and is more cost-effective.

Product features

Convenient marking: Both the front and back sides of one end of the slide are frosted, providing a large writing area. Experimenters can use pencils to clearly record sample information, experimental conditions, numbers, etc., and both front and back sides can be marked, making it more flexible to use and easier to record more information.

Good light transmittance: Made of high-quality transparent optical glass material, it has good light transmittance, which can ensure clear images observed under the microscope and can meet various microscope observation needs. The frosted surface will not have a significant impact on the observation effect of the sample.

Strong applicability: The specification is usually 25.4mm×76.2mm, and the thickness is between 1.0 - 1.2mm. It is the standard specification for microscope slides and is suitable for the stage of most microscopes, making it easy to operate and observe. It can be used with coverslips to carry out a variety of biological and medical experiments, such as temporary section observation, cell culture experiments, immunohistochemistry experiments, gene detection experiments, etc.

Edge treatment: It is designed with rough edges. Compared with frosted edge glass slides, it has fewer processing steps, relatively lower cost, and higher cost performance. However, the edges are not finely polished, so you need to pay attention when using it to avoid scratching your fingers. Reasonable packaging: generally 50 pieces/box, 50 boxes/carton. This packaging specification is convenient for storage and transportation, and is also convenient for experimenters to access in the laboratory.

Product size

Product applications

Used for clinical examination and pathological analysis in medical examination.

Used in biological research in cell biology and genetics.

It is used in biology teaching and medical teaching in the teaching field.